Craftsman 536.889252 Manual Del Usuario página 11

How To Set The Skid Height
The snow thrower is equipped with
height adjustable skids mounted on the
outside of the auger housing. See
Figure 11. To adjust the height of the
skids, see To Adjust Skid Height para-
graph in the Service And Adjustment
section
Heie
Adj
Figure 11
How To Set
The Length Of The Cables
The cables were adjusted at the factory
and no adjustments should be necessary.
However, after the handles are put in the
operating position, the cables can be too
tight or too loose. If an adjustment is nec-
essary, see "How To Check And Adjust
The Cables" in the Service And Adjust-
ment section.
F-O41074L 11