53
5.2 Waveform review
In the record list, selecting a record, then press "ok key, the quick
measurement record is shown in the figure 5.3; the external lead wire
measuring records is shown in figure 5.4.
on-screen display:
1 "
": Measured ECG waveform
2 " ": Mark corresponding to 1mV amplitude
3 "
": ECG waveform snap-shot
4 "
": Zooming box for ECG waveform
5 " ": Mark of irregular segment of waveform.
Please refer to appendix 2 for detailed
information.
Notes: The Zooming box contains ECG
waveform measured in about 3~4 seconds.
• For quick measurement by built-in
electrodes, the display will review this
record automatically, press "" ok key,
the display will browse the recorded
waveform automatically, Press it again
to stop the browsing operation; Press
the "/" can scroll the waveform
manually. When the review is finished,
press "" ok key to bring the
measurement result, as shown in
figure 5.5, in the measuring result screen,
press "" ok key, it prompts "Are you
sure to delete this record?", as shown
in figure 5.6 screen. You can delete
this record according the prompts.
• For external lead wires measurement
(limb lead and chest lead), the display
shows 5 lines of compressed waveform,
every line contains 30 seconds of waveform
data as shown in figure 5.4. Press the
"/" key to move the grey zooming box pane,
press "" ok key to zoom in the waveform display
within the grey zooming box.
The chest lead review screen is shown in figure 5.7; the limb lead review
screen is shown in figure 5.8.
ENGLISH
Review (External electrodes)
Figure 5.4
Figure 5.5
Figure 5.6