Waveform Review; Record List - Gema Cardio-C Manual De Uso

Notes:
1. Voice prompts for working status and measuring result.
2. The device can provide with 19 types ECG measurement result display
when using the quick measurement, the measurement result descriptions
refer to the appendix 2 for detail.
3. Up to 8 hours records can be stored in built-in memory, when the memory
is full, the device will prompt that "Memory full".
4. During the external lead wire measurement, the measurement result screen
will not be displayed if you press to stop measuring.
Chapter 5

WavEForm rEviEW

5.1 record list

Select " " review key on the default menu screen, then press "" ok key
to enter into the user ID list screen, as shown in Figure 5.1. Selecting a folder
which contains the data for a given ID, then press OK key, the display screen
is as shown in Figure 5.2.
Figure 5.1
Waveform review/ID list
legend of icons:
Indicates the measured result without irregularity found.
:
Indicates the measured result with irregularity found.
:
Indicates that the waveform with much interference or lead off
:
during measurement.
: Indicates the Limb measurement by external electrodes
(With 4 lead wires)
: Indicates the Chest lead measurement by external electrodes
(With 3 lead wires)
: Indicates the quick measurement (by built-in electrodes)
Note: the ID list only display the ID which contains data.
ENGLISH
Figure 5.2
Waveform review/record list
Figure 5.3
Quick measurement
52