Dip Switch - LEGRAND 430 523 Manual De Usuario

MAIN PART DESCRIPTION
Mounting Hook

DIP Switch

• Dome Cover
Do not detach the protection vinyl from the dome cover before finishing all the installation process to protect
the dome cover from scratches or dust.
• DIP Switch
Used to set up camera IDs and protocols.
• Dome Cover Lock-up screw
Used to lock up the dome cover after assembling the dome cover with the main body.
• Dome Cover Assembly stud
Used to line up the stud on the main body and the stud on the dome cover when assembling the dome cover
with the main body.
• Surface Mount Bracket & Mounting Screw Hole
Used for surface mount type, wall mount type and ceiling mount type. They are not used for in-ceiling mount
type.
• Mounting Hook
Used to assemble the main body with wall mount bracket or ceiling mount bracket. Insert the mounting hooks
into the holes on the surface of the main body and turn the main body.
• Main Connector
Used for the power wire, the video cable and the RS-485 communication cable connection.
• Sensor I/O Port
Used for the sensor in/out connection.
Mounting Screw Hole
Main C onnector
Sensor I/O Port
Dome Cover
24