Aux In Mode; General Settings - Peaq PDR261BT-B Manual De Instrucciones

Size = A5
ENGLISH
PAIRING
1. Press MODE and select the option Bluetooth
is flashing on the display.
2. Activate the Bluetooth
playback device.
3. Pair your playback device with PDR261BT-B.
4. stops flashing, when the devices are
connected.
5. Now you can start the playback on the
Bluetooth music device.
®
BLUETOOTH -PLAYBACK
®
1. Start the music playback on the audio device or
press on the product (if supported).
2. Press the
forward or backward.
3. Adjust the volume with VOLUME -/+.

AUX IN Mode

1. Connect the audio cable (not included) into the
AUDIO jack (3.5 mm).
2. Press MODE to select AUX as a source.
3. Start playing from the device.
Attention
Check the safety and user instruction of the
external device before connection.
Note:
• The equipment will enter network standby mode
after approx. 15 minutes with max. 1.5 W power
consumption.
• FM is exceptional, it is inappropriate for the
intended use of equipment if the apparatus didn't
receive radio signal on FM mode.
• In Internet radio, Music player, DAB radio,
Bluetooth Audio, USB and AUX in mode, the
unit will automatically go to Standby mode after
15 minutes, if it has no audio playback. Press
Standby button to resume.
24
IM_PDR261BT-B_190923_V04_HR.indb 24
function on the
®
buttons shortly to skip title

General settings

Press and hold MENU in any mode and select
[System] with / . Confirm selection with
SELECT.
Following menu options are available:
• [Equaliser]
• [Network]
• [Time/Date]
• [Inactive Standby]
• [Language]
• [Factory Reset]
• [Software update]
• [Software upgrade]
• [Setup wizard]
• [Info]
• [Privacy info]
• [Display backlight]
EQUALISER
Here you can select preset sound formats or
create one of your own.
Select a sound format:
Flat, Classic, Rock, Pop, Jazz The sound setting is accepted right away.
Alternative you can adjust the sound setting
directly with the button EQ on the remote control.
NETWORK
Select this entry to display the list of networks with
which the Internet radio can establish an automatic
connection or select the entry network assistant to
search available networks.
SETTING THE TIME
1. Select menu option Time/Date with
confirm with SELECT.
2. Use / to select the desired sub-menu:
• Set Time/Date
• Auto update
- Update from DAB
- Update from FM
- Update from Network
- No update
• Set format:
- Set time zone
- Daylight savings
and
/
23/9/19 6:04 pm