Assembly And Adjustments; Tools; Dis) Assembly - Vermeiren Pluo Manual De Instrucciones

5

ASSEMBLY AND ADJUSTMENTS

5.1

Tools

To (dis)assemble and adjust the shower chair, the following tools are needed:
• Wrench set no. 13
• Allen keyset n° 3 - 4 - 5
5.2

(Dis) Assembly

The following description explains the assembly of the chair. To disassemble,
follow the steps in reverse order.
1. Connect left and right frame at the front by
frame tube (17):
• Insert the socket screws (16) in the frame
holes and tighten screws and nuts firmly.
• Verify that the frame parts are well secured.
2. Connect left and right frame at the back by
backrest frame (18).
• Slide the back frame tube (18) over the
protruding tube ends of the side frames.
• Mount the backrest (2) with the curved side
on top.
• Use the four socket screws (19) and tighten
firmly.
3. Mount the seat:
• Turn the frame upside down and place the
seat frame on the underside of the seat.
• Make sure that the bucket stop is at the front.
• Tighten the 2x3 socket screws (20) firmly.
17
19
20
20
7
Pluo
2019-10
16
18
19
2
20
EN
NL