Initial Start-Up - hafele DT 100 Instrucciones De Funcionamiento

4. Installation
5. Start-up

5.1 Initial start-up

6. Allocating locking authorisation
The installation instructions are a separate document and are enclosed with the
product. They are exclusively intended for:
• The operator,
• The installation and start-up personnel.
After these groups of people have read chapters 1 - 3 of these operating instructions,
they should now obtain and read the separate "Installation instructions" document
for installation purposes.
The product is supplied in so-called "simple mode" for stand-alone operation (SA).
These instructions only describe how to start up in this mode.
The work operations only need to be carried out once during initial start-up. The
individual work operations must be carried out within a short time window. Therefore:
• First study every work operation and have the keys that are needed at the ready
before commencing with initial start-up.
• Perform the work operations quickly and without interruptions.
For step-by-step instructions "Start-up" see
illustrations starting on page 42.
NOTE
Warning of abuse!
Unauthorised persons can gain access to rooms using the
programming and clearing keys.
> Only personnel who are authorised by the operator may
allocate locking authorisations!
> Take care when allocating locking authorisations to avoid
overlapping or mistakes.
> Keep programming and clearing keys in a safe place and
protect from abuse.
Locking authorisations for user keys can be allocated in 3 different categories:
• Normal user keys
All doors to which the user key has locking authorisation can be opened with
these user keys. The locks lock again automatically after 3 seconds. Doors with
the "do not disturb" function activated cannot be opened.
For step-by-step instructions "Allocating locking
authorisation - normal user keys" see illustrations
starting on page 43.
13