Operating Instructions; Cleaning The Air Filter - Stihl KM 55 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

:
Unscrew and dry off the spark plug.
:
Open the throttle wide.
:
Crank the engine several times with
the starter to clear the combustion
chamber.
:
Refit the spark plug and connect the
spark plug boot – push it down
firmly.
:
Set the stop switch or slide control
to I / #
:
Set choke lever to e, even if the
engine is cold.
:
Now start the engine.
Fuel tank run until dry
:
After refueling, press the fuel pump
bulb at least five times – even if bulb
is filled with fuel.
:
Adjust choke lever to suit engine
temperature.
:
Now start the engine.
KM 55

Operating Instructions

During break-in period
A factory new machine should not be run
at high revs (full throttle off load) for the
first three tank fillings. This avoids
unnecessary high loads during the
break-in period. As all moving parts
have to bed in during the break-in
period, the frictional resistances in the
engine are greater during this period.
The engine develops its maximum
power after about 5 to 15 tank fillings.
During operation
After a long period of full-throttle
operation, allow engine to run for a while
at idle speed so that the heat in the
engine can be dissipated by flow of
cooling air. This protects engine-
mounted components (ignition,
carburetor) from thermal overload.
After finishing work
Wait for engine to cool down. Drain the
fuel tank. Store the machine in a dry
place. Check tightness of nuts and
screws (not adjusting screws) at regular
intervals and retighten as necessary.
English / USA

Cleaning the Air Filter

2
1
Dirty air filters reduce engine power
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
Set choke lever to g
:
:
Press in the tab (1) and swing the
filter cover (2) open.
:
Clean away loose dirt from around
the filter.
19

Capítulos

Tabla de contenido
loading

Tabla de contenido