Idiomas disponibles
Idiomas disponibles
Seat cushion handling
Insert the key into the key
hole ① at the lower left of
the seat cushion, rotate
the key clockwise, and pull
up the front part of the
passenger seat cushion to
remove
the
passenger
seat cushion.
Remove the screws ② on
both sides of the driver's
seat cushion, pull it backwards and then lift it
upwards to remove the driver's seat cushion.
To install the passenger seat cushion, push the seat
cushion from the rear to the front, push the hook ③
on the back of the seat
cushion into the seat cush-
ion fixing groove ④; align
the seat cushion lock hook
⑤ on the back of the seat
cushion with the lock hole
⑥, press down the rear of the seat cushion, and
hear the seat cushion lock click, indicating that the
seat cushion has been installed.
To install the driver's seat cushion, push the seat
cushion from the rear
to the front, push the
hook ⑦ on the back of
the seat cushion into
the seat cushion fixing
groove ⑧; align ⑨ on
both sides of the seat
cushion with ⑩ and
press it down, the screw hole ⑩ corresponds to the
hole ⑨, install the fixing screw, and then the driver's
seat cushion can be installed.
Front shock absorber
Clockwise
rotation
slotted
screwdriver
Direction) Right and left
shock
absorber
knobs,
reset resistance The force
increases
and
the
decreases
for
(S direction). Adjust the left and right shock
absorbers to the same damping force level.
Factory adjustment is 2 turns (use a slotted
screwdriver to adjust the adjusting bolt clockwise
20
of
Right
Left
(H
restoring
damping
force
counterclockwise
rotation
