Idiomas disponibles
Idiomas disponibles
• Check that the stabiliser is
attached securely and that the
retaining knob is finger tight
and secure. If screw threads
become crossed, please contact
Daytot Customer Services.
• Check that all wheel units can
move freely in all directions and
that the moving surfaces are
free from large chips or dents.
• Ensure all wheel units are in
contact with the floor when
set on a flat surface, excluding
the central stabiliser wheel
(1mm clearance).
• Check that the cushion and
covers are fitted correctly to
the plastic parts. If they have
become damaged, please
contact Daytot Customer
Services.
• Check that the bibs are not
damaged and are fitted neatly
ensuring there is no excess
material gathered in the head
area. Failure to do so could result
in the obstruction of airways.
• Keep an eye on the key
positioning requirements for
sizing and ensure the right
configuration is being used for
the child.
SECTION 9:
Re-Issuing
Daytot Products
Before re-issuing a Daytot
product, we recommend that it
is disinfected using the following
procedure:
• Note: Always clean the product
first to remove accumulated
soiling prior to disinfecting/
sanitising.
• All hardware surfaces should
be wiped over with disinfectant
surface wipes or liquid
disinfectant on a soft cloth.
Suitable products are 70% IPA,
70% Alcohol or antibacterial
wash and warm water. The
manufacturer's instructions for
the chosen product should be
followed. Product upholstery
and fabrics should be cleaned
thoroughly in accordance with
Section 7, 'Cleaning and Care'.
• Ensure a copy of the user
manual is supplied with the
product. If in any doubt of the
continued safe use of your
Daytot product or if any parts
should fail, please cease using
the product and contact Daytot
Customer Services.
10
DaytotJoey
– USER MANUAL
