DaytotJoey
– USER MANUAL
• Do not fully submerge the
product in water.
• Make sure all hardware parts
are completely dry before
reassembling / use.
Upholstery
• Do not tumble dry or iron
any parts.
• Limit staining as quickly as
possible with an absorbent
cloth, towel, or sponge. Soap
and warm water sponging are
effective for ordinary soiling and
minor spills. Be careful not to
saturate the fabric as it could
cause the stain to spread.
• The upholstery covers can be
machine washed at 40 degrees.
Remove the cushion before
washing.
• The bibs can be machine
washed at 40 degrees.
• To ensure that Velcro remains
'sticky', remove any 'fluff' build
up on a regular basis by using
either a dry toothbrush, wire
cat/dog brush or an adhesive
lint roller.
• Make sure all upholstery items
including foam parts are fully
dry before reassembling.
Cushion
• If required, use a cloth with a
small amount of warm water
and domestic anti-bacterial
soap to clean the foam. Ensure
the cushion is completely dry
before use.
• Do not machine wash or tumble
dry.
Activity Mat
• Wipe-clean with warm
soapy water or disinfect with
household disinfectant. Do not
use bleach. Wash before first use.
SECTION 8:
Daily Inspection
The following guidance should
be followed before each session.
If you have any doubt as to the
safety of the product, stop
using immediately and contact
Daytot Customer Services at
• Ensure all plastic parts are not
damaged. Check for large chips
or cracks.
• Ensure all upholstery parts are
not damaged. Check for tears,
loose stitching, excessive soiling,
and that elastic parts still have
integrity.
09