Main Menu - Televes Avant 3 Manual De Instrucciones

User manual

4.1.- MAIN MENU

From now on, by pressing quickly on
can go through the main menus, in this
order: Inputs, Filter 1, ..., Filter 5 and VHF
Filter.
Note:
If you want to modify the menu language
before beginning the configuration of the
device, you must go to the "language"
menu. To do so, press (long press) to
access the Extended menu and then use
or to select the language. Finally
press (long press) to save the changes.
For further information, see "Extended
menu = > Language selection".
1.- Configuration of inputs
you
The first menu is the "Inputs" menu. The
buttons for this menu are as follows:
- These go through the menu options:
5-0, 2-3.
- (short press) - This positions the cursor
over each of the parameters that can be
modified
- (long press) - This accesses the exten-
ded menu (language).
- (short press) - This accesses the next
main menu.
- (long press) - This saves the parame-
ters.
To modify a value, press
will begin flashing. You can change the
value using or .
I S
NPUT
U1 | U2
|
[2] |[3]
48
2.- Filter programming
By pressing
menu, Filter programming. The buttons for
this menu are as follows:
- This selects the lower and upper
channels of the filter.
- (short press) - Cursor position.
- (long press) - Nothing.
- (short press) - This goes onto the next
menu.
- (long press) - This saves the parame-
ters.
, and the value
Press
I S
NPUT
U1 | U2
channel of Filter 1. Use
|
the lower channel of the filter. Press
[5] |[0]
(short press) to enable the upper channel of
the filter. Use
channel of the filter.
Avant 3
you can access the second
FILTER 1
__
(short press) to enable the first
and to select
and to select the upper