cecotec ENERGYSILENCE AERO 5280 WHITEWOOD Manual De Instrucciones página 50

ENGLISH
mounting bracket and allow the ball to rest on the bracket. Rotate the hole in the hanging
ball until it aligns with the tab on the mounting bracket.
Tip: Have someone else hold the ladder securely and bring the fan closer to you once it is on
the ladder.
Blade assembly. Fig. 10
Time saver: Blade bolt washers can be installed on each blade prior to installation.
7. Align the holes in the blades with the screw holes in the motor. Once all blades are
attached, tighten all the screws. Before securing screws permanently, repeat with
remaining blade arms.
Note: Tighten the blade screws a second time.
LED-Lamp assembly. Fig. 11-12-13
8. Unscrew the screws. Attach the LED plate to the bottom of the fan by inserting the fixing
screws into the holes. Then turn it until it is firmly in place. Then screw in the previous
fixing screw by aligning the hole in the screw and the hole in the bottom of the fan.
Finally, tighten the other two fixing screws to secure the LED plate. Fig. 11
NOTE: During the installation or when the LED lamp is removed, keep the insulation pads
intact. Over-tightening the screws may damage them.
9. Replace the cover and the LED lamp. Fig. 12
10. Align the decorative cover with the engine tread and tighten it clockwise. Fig. 13
4. OPERATION
Remote control. Fig. 14
1. Power button
2. Speed control
3. Winter function
4. Summer function
5. Natural Breeze
6. Natural Breeze shut-off
7. Timer controls
8. Light
- Use the speed buttons to select the air power level.
- Press the power button to turn the appliance off.
- Use the timer buttons to select the fan operating time. The fan will turn off once the
selected time has elapsed.
- Press the light button to turn the fan's lamp on and off.
- The remote control requires 2 x 1.5 V-3 AAA batteries.
50 ENERGYSILENCE AERO 5280 WHITEWOOD/BLACKWOOD
ENERGYSILENCE AERO 5285 WHITEWOOD/BLACKWOOD