cecotec ENERGYSILENCE AERO 5280 WHITEWOOD Manual De Instrucciones página 49

Ventilador de techo de 40w con motor dc y 52” con luz led
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 40
Fan assembly and suspension. Fig. 7
Fig. 7 key:
1. Electric wiring
2. Hanging ball holes
3. R clip
4. Adapter
5. Canopy
6. Decorative cover
7. Spring pin
8. Locking screw
-
If you want the fan to hang lower, you must remove the hanging ball from the supplied
6-inch downrod for use with a longer rod (included). (If you wish to use the 6-inch
downrod, follow the steps below).
-
To remove the hanging ball, loosen the suspension ball fixing screw and remove the
pin and clip. Lower the hanging ball and remove the clevis pin. Slide the hanging ball off
the downrod and slide it onto the longer rod (note that the top of the rod has a hole for
the fixing screw). Insert the stop pin into the top of the extended downrod and raise the
hanging ball. Make sure that the clevis pin is aligned with the holes on the inside of the
hanging ball, tighten the fixing screw securely.
Tip: To prepare for passing the electrical wires through the rod, attach a small piece of
electrical tape to the ends of the electrical wires to hold them together when passing them
through the rod.
2. Loosen the fixing screws and nut on the top of the motor housing. Remove the pin and
rod clip (if you have not already done so). Slide the rod down through the canopy.
3. Pass the electrical wires through the rod and pull the wires protruding from the top of the
rod end.
4. Place the main-body attachment downrod into the main body anchorage of the motor
housing and insert the pin and clip previously removed. Tighten the fixing bolts and the
main-body attachment nut securely. Lower the canopy onto the motor housing.
Remote control connection. Fig. 8
Canopy assembly. Fig. 9
5. Lift the canopy up to the mounting bracket, aligning the loosened screws in the bracket
with the holes in the canopy. Turn the canopy to lock it. Re-insert the screws and secure
them all with a screwdriver.
6. Once you have secured the mounting bracket to the connection cover, you can hang the
fan. Hold the fan firmly with both hands. Slide the downrod through the opening in the
ENERGYSILENCE AERO 5280 WHITEWOOD/BLACKWOOD
ENERGYSILENCE AERO 5285 WHITEWOOD/BLACKWOOD
ENGLISH
49
loading

Este manual también es adecuado para:

Energysilence aero 5280 darkwoodEnergysilence aero 5285 whitewoodEnergysilence aero 5285 darkwood084750847608477 ... Mostrar todo