cecotec ENERGYSILENCE 490 FRESHESSENCE Manual De Instrucciones página 55

Blades maintenance
- Switch off and disconnect the fan before performing any maintenance on the blades.
- Use a soft damp cloth to clean the blades. Avoid handling them with sharp or abrasive
objects that may damage their surface.
- Make sure they are completely dry before using the device again.
Cleaning the water tank
Remove the water tank and clean it with lukewarm water after each use.
Before replacing the water tank on the appliance, make sure that it is completely dry.
Cleaning mineral deposits
- To prevent minerals from building up or reduce them, follow the recommendations below.
- Use demineralised or distilled water.
- Follow this procedure at least once a month:
1. Make sure the appliance is unplugged and cooled down.
2. Use specific descaling liquid for cleaning electrical appliances and follow the instructions.
3. Rinse with plenty of demineralised or distilled water, making sure that there are no traces
of descaling liquid left.
4. Make sure that the inside of the tank is clean and dry before putting it back on the appliance.
5. Re-install the water tank.
Storage
- If the fan is not to be used for an extended period of time:
- Clean and dry the fan properly before storing it.
- Store the device in a cool, dry place away from direct sunlight.
- If possible, store the fan in its original packaging for extra protection against dust and
damage.
ENERGYSILENCE 490 FRESHESSENCE
ENGLISH
55