Idiomas disponibles
Idiomas disponibles
Care and Cleaning
1a
Draining the Air Conditioner (non
heating models
WARNING: Excessive Weight Hazard
Use two or more people to move and install the air
conditioner. Failure to do so can result in back or other injury.
□ Unplug the air conditioner or disconnect power.
□ Move the air conditioner to a drain location or outside.
NOTE: To avoid leaking water from the unit, move the air
conditioner slowly and keep it level.
□ Remove the primary drain cover (1) and plug (2).
□ Drain water completely through the drain hole.
NOTE: If the air conditioner will be stored after use, see
"Storing After Use".
□ Reinstall the drain plug to the primary drain hole.
□ Reinstall the primary drain cover to the drain hole.
□ Reposition the air conditioner.
□ Plug in the air conditioner or reconnect power.
1b
Draining the Air Conditioner
(Heating models)
WARNING: Connect the drain hose on heating mode, or
the unit will stop running after the water reaches warning
level.
□ Uncover the primary drain port (1).
□ Attach the drain hose (2) to the primary drain hole (3).
Make sure the connector has no water leak.
□ Place the other end of drain hose into a outfall. Check to
see that the hose lies at and is in the drain. Make sure the
hose end that goes to the drain is on a lower level than the
hose end that connects to the unit. The hose should not be
kinked or pinched.
1
21
2
1
3
2
