Hama 00081724 Instrucciones De Uso página 5

Risk of electric shock
• Do not attempt to service or repair the product yourself. Leave any and all service
work to quali ed experts.
4. Operation
Note – 12-V/24-V vehicle electrical system
The charger is suitable for use with a 12-V or 24-V vehicle electrical system.
Warning – Connecting terminal devices
• Before connecting a terminal device, check whether the power output of the
charger can supply su cient power for the device.
• Ensure that the total power of all connected terminal devices does not exceed 30
W (USB-C 18 W + USB-A 12 W).
• Please refer to the instructions in the operating manual of your terminal device.
Note – Power Delivery / QC 3.0, 2.0
• Plug & go: No manual setup necessary, just connect and start:
Voltage and power are automatically con gured by Power Delivery/QC 3.0, 2.0.
• For e cient and optimised charging, the Power Delivery (PD)/QC 3.0, 2.0 function
must be supported by your terminal device.
• With the large quantity of PD/QC-enabled terminal devices with different rmware
versions, it can happen that the function is not fully supported.
Unless different instructions have been expressly given in the operating instructions for
the devices you are charging, proceed as follows:
• Connect your device to the charger.
• Then connect the charger to the on-board electrical system's car socket.
• The charging process is displayed on your device.
• Disconnect the device from the charger if you wish to interrupt the charging process
or when the device is fully charged.
• Then disconnect the charger from the line connection.
When charging the rechargeable batteries in the device, note the maximum charging
times for the built-in batteries.
Note – Car battery
With some vehicles, it can happen that power continues to be supplied even though
the ignition has been switched off. Therefore, when not using the product, disconnect
it from the power supply to protect your car battery from discharge.
5. Care and Maintenance
Only use dry, soft cloths for cleaning.
Note
Disconnect the device from the power supply before cleaning or if it will not be
used for a long period of time.
3