Silvercrest PD-8921 Instrucciones De Utilización Y De Seguridad página 20

parts with a damp cloth. Never
use scouring agents.
Note: Before connecting the
product, ensure that the mains
voltage specified on the product
matches the local line voltage
(voltage: 220 V–240 V, 50 Hz).
Initial use
Note: Before using the product, always make sure
that the mains cable, the mains plug and all the
component parts of the product are undamaged.
Insert the mains plug of the mains cable into
the socket. The socket must always be well
within reach.
Grease the griddle
Push the on/off switch
switch the product on. The operating indication
light on the on/off switch
pans should not be on the base
2
is heating up.
Let the product heat up for approx. 15 minutes.
Wait until the griddle
you put food on it.
Note: When heating the product for the first
time, a slight smell may develop. This is normal.
Make sure you have adequate room ventilation.
The smell will only remain for a short time and
will disappear quickly.
Grease the griddle
with oil.
Do not use metal parts to avoid damaging the
anti­stick coating.
Fill the small pans
and place them in the base
intended for this (see Fig. A).
Keep checking how cooked the food in the
small pans is. Remove the small pans
2
from the base when the food is cooked to
4
your satisfaction.
Push the food from the small pan
plate using the plastic spatula
20 GB/IE
with oil.
1
into Position "I" to
3
lights up. The small
3
while it
4
has heated up before
1
and the small pans
1
with your chosen foods
2
in the spaces
4
2
onto a
2
.
5
Grill:
Note: In addition to raclette and fondue, you
can grill meat, vegetables or small pieces of
fruit on the griddle
Never place frozen food on the griddle
Heat shock can damage it.
If you will no longer be using the product, push
the on/off switch
it off. The operating indication light on the on/off
switch will go out.
3
Never move the griddle
when it is still hot. There is a risk of burns.
Cleaning and care
OF ELECTRIC SHOCK! To ensure
electrical safety, never clean the
product with harsh cleaning products
or immerse it in water.
ELECTRIC SHOCK AND BURNS!
Before cleaning, unplug the mains
plug from the mains socket and wait
until the product has cooled down.
Wipe the inside and edges of
the base
If needed, you can put a mild
2
detergent on the cloth. Then wipe
the product off with a clean,
damp cloth.
Clean the griddle
pans
2
in warm dishwater. Dry all
5
parts thoroughly.
Never use strong or abrasive
cleaning agents, scourers or
.
1
into Position "0" to switch
3
with your hands
1
DANGER
RISK OF
with a damp cloth.
4
, the small
1
and the plastic spatulas
.
1