Silvercrest PD-8921 Instrucciones De Utilización Y De Seguridad página 19

operating voltage required by the
product (220–240 V∼, 50 Hz).
Prevent fire and
injury hazards
Do not cover the product with
any objects while it is in use.
Excessive heat can result in fire.
Never leave the product unat­
tended whilst in operation. Ex­
cessive heat can result in fire.
Only connect the product to an
easily accessible socket, so that it
can quickly be disconnected from
the mains in the event of a fault.
The product must be positioned
on a flat, stable surface.
Do not use the product with an
external timer or a separate
remote control system.
The temperature of the accessible
surfaces may be high when the
product is in operation.
Danger of damage
to property
Do not use the product in direct
sunlight or near heat­producing
devices.
Discontinue using the product if
parts are cracked or deformed.
Always replace damaged parts
with genuine spare parts.
FOOD SAFE! This prod­
uct has no adverse effect
on taste or smell.
Before use
Remove the product and the ac­
cessories from the packaging.
Remove all stickers, protective
films and transport locks from
the product.
Place the product on a flat and
stable surface and ensure that
there is a minimum of 10 cm of
clear space around the product.
To avoid the product falling
down, do not set up the product
on the edge of your table.
This product is not suitable for
connection or use in a cupboard
or outdoors.
We recommend separating the
table from the product with a
heat­resistant underlay (this way
you can avoid burn marks on your
table or tablecloth). The surface
you place it on should also be
easy to clean, as splashes cannot
always be avoided.
Before you set up the product for
the first time, wipe all removable
GB/IE 19