Idiomas disponibles
Idiomas disponibles
Installation
Freezer Handles
Partial-Width
Handle
Materials
Needed:
• Phillips screwdriver
To Install:
1. Install handle by fastening
with
screws removed from edge of door.
• If reversing freezer door, remove
door plugs from top edge of door
and insert into screw holes.
To Remove:
1. Remove handle screws with Phillips
screwdriver
and retain screws for
later use.
1
!
Front Mount
Plastic Freezer Handle
Notes:
• There is a slight curve to
this style of freezer handle.
• For proper installation,
be
sure handle is oriented as
shown.
To Install:
1. Align door handle
clips to the studs
attached
to the
freezer door.
2. Ensure the large
hole in the
mounting clip is
positioned to the
right on both ends
of the handle.
Handle
Door Stud
3. Rotate the handle so that the handle is flat against
the door.
4. Grasp the handle firmly and slide handle to the
right.
To Remove:
1. With both hands, firmly grasp the handle toward
the right side.
2. Slide toward the left, lift and remove from the
surface.
