Idiomas disponibles
Idiomas disponibles
Temperature
Controls
Touch Temperature Controls
(select
models)
The controls are located at the top front of the
refrigerator
compartment.
Control
Adjusting
the Controls
• 24 hours after adding food, you may decide that one
or both compartments
should be colder or warmer. If
so, adjust the control(s)
as indicated
in the
Temperature Control Guide table below. See page 20
for instructions
on checking
compartment
temperature.
• Except when starting the refrigerator,
do not change
either control more than one number at a time.
Initial
Control
Settings
After plugging the refrigerator
in, set the controls.
• Pressing the
or
pads adjusts the controls
to the desired setting.
• The temperature
control range for both
compartments
is 1 through
7 (coldest).
• Set the Freezer control on 4.
• Set the Refrigerator
control on 4.
• Let the refrigerator
run at least 8 to 12 hours before
adding food.
Warm Cabinet Surfaces
At times, the front of the refrigerator
cabinet may be
warm to the touch. This is a normal occurrence
that
helps prevent moisture from condensing
on the
cabinet. This condition will be more noticeable when
you first start the refrigerator,
during hot weather and
after excessive or lengthy door openings.
• Allow 24 hours for temperatures
to stabilize.
Temperature
Control Guide
Refrigerator
too warm
Refrigerator
too cold
Freezer too warm
Freezer too cold
Turn refrigerator
OFF
Set the Refrigerator
control
to next higher number by
pressing the _
pad.
Set the Refrigerator
control
to next lower number by
pressing the_
pad.
Set the Freezer control to
next higher number by
pressing the_
_pad.
Set the Freezer control to
next lower number by
pressing the_
pad.
Press the Refrigerator or
Freezer_
pad until a dash
(-) appears in the display.
11
