Amplicomms BigTel 48 Manual De Instrucciones página 21

still be shown in the display for a few seconds and the display then jumps
back to showing the present time.
4.6 Adjustable ringing tone
By means of the "Ringer" slide switch on the right-hand side of your tele-
phone you can choose the settings "SOFT" (
volume of the ringing tone to your requirements. If at any time you do not
want to be disturbed, use the "OFF" setting.
4.7 Storing direct and speed dial numbers
You can store a telephone number for direct dialling on each of the buttons
M1, M2 and M3 with your telephone. The direct dial button M1, M2 and M3
are coloured red and suitable for use as emergency call buttons. An additio-
nal ten important numbers can be stored as speed dial numbers.
1. Lift the receiver.
2. Press the store button
3. Now enter the required telephone number using the number pad. The
maximum length is 16 digits.
4. Press the store button
5. Now press the required direct dial button M1, M2 or M3 or a button on
the number pad between 1 to 9 or 0 to save the telephone number as a
speed dial number.
6. Replace the receiver.
Storage locations already used are deleted automatically when you store a
new telephone number in this location.
The numbers stored can be recorded on the index underneath the receiver.
For this purpose, the cover can be removed with a pointed object.
4.7.1 Dialling using the direct dial buttons
1. Lift the receiver and press the required direct dial button M1, M2 or M3.
4.7.2 Dialling using the speed dial buttons
1. Lift the receiver and press the speed dial button
storage location from 1 to 9 or 0.
.
again.
O
), or "LOUD" to match the
and the required
PERATION
21