Idiomas disponibles
Idiomas disponibles
PM 3550
7. Never immerse the appliance in water or any other
liquid.
8. This appliance is for household use only.
9. In case that you need a copy of the instruction manual,
you can ask for it writing an email to [email protected]
10. WARNING: In case of misuse, there is a risk of possible
injury.
• The appliance is designed exclusively for private use and
for the envisaged purpose.
• Keep it away from sources of heat, direct sunlight,
humidity (never dip it into any liquid) and sharp edges.
• Use only original spare parts.
OPERATION
Removing the lid of the housing
• Turn the lid slightly in an anticlockwise direction.
• Then pull the lid upwards to remove it.
Inserting the batteries
• Remove the cover from the battery compartment.
• Insert 4 batteries /AA/LR6 into the battery compartment. Please ensure the correct polarity.
• Replace the cover in order to secure the batteries.
Note: With the switch you can switch the mill on and off.
Filling with ,aterials to be milled.
• Pull the motor section to separate it from the storage container.
• The storage container can be filled with peppercorns or grains of salt.
Replacing the motor section
• In order that the electricity can be transmitted to the lamp, the contact pins have to engage with the
contact screws on the storage container.
• Please also note that the drive fits on to the axle of the storage container.
Positioning the lid
• Then position the cover of the housing such that the arrow is pointing to the symbol on the storage
container.
• Turn the cover a short distance in a clockwise direction.
• The lid is now locked in place.
Setting the degree of grinding
6
