Idiomas disponibles
Idiomas disponibles
10 Drip grid
11 Temperature display (
coffee /
12 Handle for removing the water tank
13 Water tank lid
14 Removable water tank
15 Hooks for attaching the water tank
16 Filter holder
17 Filter insert for 1 cup
18 Filter insert for 2 cups
19 Measuring spoon / tamper (1 part, 2 functions)
Without Illustration
Adapter for Nespresso compatible capsules
Warnings for the Use of the Appliance
WARNING:
• Check the controller position before each operation!
The controller must be in position
the mains plug into a socket!
• Do not allow moisture to enter the housing. There is a
risk of electric shock.
• The brew head, filter holder, steam nozzle and cup
tray become very hot during operation. Danger of
burns!
• Make sure that the filter holder is correctly and securely
closed during operation, as this appliance operates
under pressure.
• Only use the appliance when there is water in the water
tank.
• Fill the water tank only with cold water.
• Only use drinking water. Never use carbonated water
(sparkling water).
• Do not move the appliance when it is in operation.
Notes for Use
Location
• Place the appliance on a flat and non-slip surface.
• Do not operate the appliance under wall cabinets be-
cause of the rising heat and fumes.
• Do not place the appliance directly next to a gas or
electric cooker or any other heat source.
Electrical Connection
1. Before you insert the mains plug into the socket, check
that the mains voltage you want to use matches that of
the appliance. You will find the information on the type
plate.
2. Check the controller position! The controller must be in
position .
3. Only connect the appliance to a properly installed
earthed socket. A beep sounds and all indicator lights
flash briefly. The appliance then goes into standby mode.
PC-ES1267_IM
Indicator Lights of the Buttons
steam)
The indicator lights of the buttons display which function is
activated.
Button
Analogue Temperature Display
Colour
before you plug
Yellow
Green
Blue
Switch On / Off
• Press the
sounds. The control lamp for the
while the other control lamps flash. The appliance starts
heating. The heating plate becomes hot.
- Once the required brewing temperature has been
• Press the
sounds and all control lamps go out. Then pull the mains
plug out of the socket.
European Regulations on Energy Saving
The European Directive 2009 / 125 / EC (Ecodesign) bundles
measures for energy saving.
Therefore, the appliance switches to standby after 30 min-
utes. This cannot be displayed for technical reasons. Press
any button to switch the appliance back on.
You benefit from increased safety and lower power con-
sumption.
Interesting Facts about Espresso
• Espresso beans are roasted longer, so espresso is more
suitable for people with sensitive stomachs than regular
coffee.
• Espresso tastes stronger than coffee. This is due to the
different roasting process. It is usually drunk without
milk. Depending on taste, it can be drunk sweetened or
unsweetened.
Indicator Light
Flashes
The appliance heats
up to the brewing
+
temperature for
making coffee.
The appliance heats
up to the brewing
temperature for
steam generation.
Meaning
Heating phase
Coffee brewing temperature
Water vapour temperature
button to switch on the appliance. A beep
reached, all control lamps light up. You can read
the current brewing temperature on the scale of the
temperature display.
button to switch off the appliance. A beep
Lights up
The brewing tem-
perature for coffee
preparation has been
reached.
The brewing tem-
perature for steam
generation has been
reached.
button lights up
15
22.11.23
