Viewing Address Number; Pairing; Selecting The Temperature Unit; Communication Test - Mitsubishi Electric ecodan PAR-WT50R-E Manual De Instalación Y Configuración

Confirm setting by pressing
The display stops blinking and lights steadily.
When button is pressed in the middle of set-
ting, the screen returns to the previous indication.
Mode
Names
No.
Pairing address dis-
0
play
1

Pairing

2 Temperature unit
3

Communication test

Room temperature
4
display
Automatic zone no.
5
display
6.1. Viewing Address Number (Mode No. 0)
Set the mode no. to "0".
The display to the right shows that the address is
set to "2".
6.2. Pairing (Mode No. 1)
For details, refer to "5. Pairing process".
6.3. Selecting the Temperature Unit (Mode No. 2)
Set the mode no. to "2".
The temperature reading can be selected between
Celsius (°C) or Fahrenheit (°F).
Press or button to select °C or °F and
press button to confirm the selection.
13
button.
Functions
To view the own pairing address of the wireless
remote controller.
To perform a pairing process with the wireless re-
ceiver.
To select °C or °F.
Communication test with the wireless receiver.
Actual room temperature display
To enable or disable automatic zone no. display.
Initial
settings
°C
OFF
OFF