Assembly - Attaching the Fan Blades
1
Attaching the blades to
the blade brackets
□
Attach a blade (G) to the blade arm (F) by aligning the holes on
the blade arm bracket (H) with the holes on blades (G) and blade
arms (F), inserting the screws (AA) into the holes in the blade
arm (F) and through the blade (G), blade arm (F) and blade arm
bracket (H).
□
Tighten each screw to secure the blade (G).
□
Repeat this step for each blade (G), blade arm (F) and blade arm
bracket (H).
2
Attaching the blade assemblies
to the motor
□
Attach the blade assembly to the motor assembly (E) by
inserting the blade arm (F) above the black bracket at the
bottom of the fan motor and aligning the screw holes of the
black bracket with the screw holes of the blade arm (F).
□
Insert the screws (CC) through the holes on the black bracket
on the bottom of the fan motor assembly (E) and into the
screw holes on the blade arm (F). Start the screws, but do not
completely tighten these screws. The blade arms should be
slightly loose when attaching the decorative frames.
□
Repeat this process remaining blade assemblies.
3
Assembling the decorative frame
□
Attach the decorative frame (I) to the blade assembly by aligning
the two posts of the decorative frame with the two holes in
the blade. Secure the decorative frame to the blade using the
decorative frame screws (DD). Insert the decorative frame
screws (DD) through the two holes in the blade arm (F) and
screw them into the posts of the decorative frame (I). Align the
hole in the tab at the end of the decorative frame (I) with the
frame brace on the side edge of the blade arm (F) and secure
using a frame brace screw (EE). Make sure all screws are
completely tightened.
□
Repeat this process for remaining decorative frame pieces (I).
□
Once all of the decorative frame pieces are installed, completely
tighten all of the blade arm screws (CC) to secure the blade
assemblies to the fan.
G
H
11
Please contact 1-800-986-3460 for further assistance.
AA
F
E
F
CC
DD
EE
I
F
HOMEDEPOT.COM/HOMEDECORATORS
DD