Designation Of Parts; Assembly - Makita PE3450H Manual De Instrucciones

DESIGNATION OF PARTS

4
5
1. Handle
2. Throttle control
3. Drive shaft
4. Fuel tank

ASSEMBLY

WARNING:
• Before doing any work on the equipment, always stop the engine and pull the spark plug connector off the spark plug. A sudden change in the
engine speed will result in the earth auger damage or personal injury.
• Always wear protective gloves and eye protection!
• Start the engine only after having assembled it completely.
CAUTION:
• Use only auger bits designed for use with the product. Do not use incorrect auger bits.
• Use only approved auger pin and safety pin.
The auger pin supplied with the earth auger is designed to withstand the high stress encountered while digging. Use of any other connecting
device, including cap screws, bolts, pins, etc., may result in damage to the earth auger drive shaft. Improper connecting devices can cause prop-
erty damage and/or personal injury.
2
7
11
12
13
10
DESIGNATION OF PARTS
5. Recoil starter
6. Air cleaner
7. I-O switch (on/off)
8. Spark plug
3
11
6
13
4
8
14
9
10
9. Exhaust muffler
10.Exhaust pipe
11. Fuel tank cap
12.Starter knob
7
1
12
9
13.Oil gauge
14.Drain screw