QJMOTOR SRT 550 Manual Del Usuario página 21

Ocultar thumbs Ver también para SRT 550:
Idiomas disponibles
  • ES

Idiomas disponibles

"SELECT" in the state of relative mileage (TRIP 1,
TRIP 2) to clear the subtotal of relative mileage.
Press and hold "SELECT" in the TOTAL state to
switch the display of mileage and speed in metric
and English units.
When the vehicle speed is
zero, short press the "ENTER"
confirmation button to enter
the
main
menu
page
instrument selection, and you can perform "interface
switching", "clock setting", "backlight setting", "unit
setting",
"language
setting",
"mobile phone Bluetooth", "tire pressure setting"
(optional, Only for vehicles equipped with a tire
pressure module), TCS, and Exit. Press "SELECT"
to select the function to be adjusted, and then press
"ENTER" to confirm. After entering the main menu
interface, it will automatically return to the main
interface without operation for 8 seconds.
of
"vehicle
setting",
Tire pressure setting (optional, only for vehicles
with tire pressure module):
Short press the "ENTER" confirmation button to
enter the instrument selection main menu page,
select "tire pressure setting", select the tire pressure
unit, select the front and rear wheel sensor learning,
and the string will be displayed after successful
pairing learning. The lower part of the main interface
of the instrument displays the temperature and
pressure information of the front and rear tires.
When the tire is abnormal, the tire alarm light will
light up, and the text alarm content will appear in the
"fault alarm display area" on the instrument. Text
alarm contents include: high (low) air pressure of
front (rear) tire, high temperature of front (rear) tire,
quick air leakage of front (rear) tire, low voltage of
front (rear) tire, no signal of front (rear) tire, etc.
When the tire sensor is not learned, no relevant
15
loading