Idiomas disponibles
Idiomas disponibles
ASSEMBLY INSTRUCTIONS
1 . Turn the tank housing (F) upside down and
attach the wheel assembly (J) to the base of
the tank housing (F) using 2 M8 x 16 screws
(AA).
2 . Attach the 3 anchoring arms (GG) onto the
base of the tank housing (F) using 6 M6 x 12
screws (BB) and 6 M6 nuts (CC).
BB
CC
F
AA
J
F
GG
3 . Attach the belt (L) to the inside of the tank
housing using 1 M5X12 screw (DD) and
1 M5 nut (EE).
L
4 . Align the holes at the bottom of the burner
(E) to the top of the tank housing (F) -
position to have the control panel on the
burner (E) aligned with the door on the tank
housing (F). Through the aligned screw holes
attach the burner (E) to the top of the tank
housing (F) using 4 M5 x 12 screws (DD) and
4 M5 nuts (EE). Be sure to fully tighten.
E
DD
EE
F
F
DD
EE
9
