Idiomas disponibles
Idiomas disponibles
9 . Remove the 3 preassembled screws from
the upper supporters (K) . Place the reflector
(A) onto the top of the upper supporters
(K). Replace the 3 screws removed at the
beginning of this step to secure the reflector
(A) to the upper supporters (K). Be sure to
fully tighten.
K
10 . Place the glass tube (G) into the top of the
glass tube ring (D).
D
A
G
11 . Attach the 3 mesh guards (H) onto the
hooks at the top of the upper supporters (K).
K
12 . Optional: Use the anchor (FF) to fasten the
product into the ground.
FF
H
11
