Idiomas disponibles
Idiomas disponibles
YP-70VC Diaphragm Switch Deactivation Instruction:
Disconnect power and remove housing screws and housing.
Production date
Production year and month can be read as the following way.
Serial No. shows the last 2 digit of A.D. + month of the production + serial 4 digit number. (i.e.): S/N 20040001
It means the pump was produced in Apr. 2020.
Disposal method
•
When disposing of this product in EU countries, do not dispose of it as general
household waste.
•
For detailed information on the disposal method, please contact your local dealer.
Contact
1.
If the pump is used for a wastewater treatment system, please contact the system installer or
a local wastewater maintenance provider.
2. If the pump is incorporated into equipment, please contact the equipment manufacturer
3. If the pump is used in an application other than 1 or 2, please contact Gardner Denver Thomas GmbH
For more information, please see www.thomaspumps.com
The information contained in this document is the property of Gardner Denver Thomas. This document, or
parts thereof, may not be made available, directly or indirectly, to third parties, nor published or distributed
in any manner without written consent.
Gardner Denver Thomas GmbH
Livry-Gargan-Str. 10
82256 Fürstenfeldbruck/Germany
Tel: +49 8141 2280 0
YP Housing
(4) Housing screws
After positioning diaphragm protection switch levers to
proper positions to deactivate switch, reassemble unit.
Diaphragm protective
switch activated.
(Pump will not run.)
Diaphragm protective
switch not activated.
(Normal operation mode.)
11
