Parkside PDSLG 20 B1 Traduccion Del Manual De Instrucciones Originale página 20

Ocultar thumbs Ver también para PDSLG 20 B1:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 50
GB
MT
Operation
Control display
Notes
• The direction in which to read the con-
trol display (6) is from bottom to top.
• If the charger (5) is connected to the
power outlet and no battery (4) is inser-
ted, all LEDs will light up permanently.
Meaning of the control displays on the
charger (
lights up;
Meaning
Battery needs to be charged
Battery 1/3 charged
Battery 2/3 charged
Battery is fully charged
Charging the battery
NOTICE! Risk of injury from electric shock.
Only charge the battery in dry areas. The
external surface of the battery must be
clean and dry before being connected to
the charger.
Notes
• If warm, allow the battery to cool be-
fore charging.
Procedure
1. If necessary, remove the battery (4)
from the cordless device.
2. Slide the battery (4) into the charging
slot (7) of the charger (5).
3. Plug the charger (5) into an power out-
let.
4. Once charging is complete, disconnect
the charger (5) from the mains supply.
5. Pull the battery (4) charging slot out
(7).
20
flashes):
Used batteries
• If the operating time is considerably
shortened despite charging, this
shows that the battery is depleted and
must be replaced. Only use an ori-
ginal replacement battery from the
series X 20 V TEAM, which you
can purchase from the online shop
(see the Spare parts and accessories,
p. 23).
• Always observe the safety information
in addition to the regulations and in-
formation about environmental protec-
tion (see Disposal/environmental pro-
tection, p. 21).
Cleaning, maintenance
and storage
 WARNING! Risk of injury due to un-
intentional start-up. Protect yourself when
performing maintenance or cleaning work.
Switch off the device and remove the bat-
tery (4).
You should have any repair and mainten-
ance work that is not described in these
instructions carried out by our Service
Centre. Only use original replacement
parts.
Cleaning
Clean the charger with a dry cloth or with
a paintbrush. Do not use water or metal
objects.
Maintenance
The device is maintenance free.
Storage
How to store the product:
• clean,
• dry,
• protected against dust,
• out of the reach of children.
loading