Kenmore Stratus DS1035 Manual De Uso Y Cuidado página 17

Aspiradora vertical inalámbrica 2 en 1 de 24 v
Idiomas disponibles

Idiomas disponibles

Review the table for solutions to minor performance problems. Any
service needed, other than maintenance described in this Use & Care
Guide, should be performed by a qualified service dealer.
WARNING
Ensure the vacuum cleaner is turned off and removed from the
charging base before performing maintenance to it. Failure to do so
could result in electrical shock or personal injury.
PROBLEM
Vacuum will
not power on.
Battery
indicator does
not illuminate
when charging
the battery.
TROUBLESHOOTING
POSSIBLE CAUSE
Battery may be depleted.
Wrong charger being used. Be sure to use only the charger
Hand vacuum is not
installed properly.
Charging connector is
not fully plugged into the
charging base.
Charging plug is not fully
plugged into outlet.
The vacuum cleaner is not
seated correctly onto the
charging base.
Battery may be depleted.
Charging adapter is not
plugged into outlet firmly.
Debris accumulated on
the metal charge contacts
on the hand vacuum,
main body and charging
adapter.
The electrical outlet is
switched off.
The plug is not installed
correctly in to the charging
adapter body.
The vacuum cleaner is not
seated correctly onto the
charging base.
Charge the battery as instructed on
page 10-11.
supplied with your product.
Remove hand vacuum and reattach
ensuring that it is securely in place.
Be sure the charging connector is fully
inserted in the charging base.
Be sure charging plug is fully plugged
into outlet.
Be sure the vacuum is seated properly
onto the charging base and there is
nothing obstructing the connections.
Charge the battery as instructed on
page 10-11.
Be sure the charging adapter is
plugged in properly to the outlet, and
the charging connector is plugged into
the charging port of the hand vacuum.
Be sure no debris is accumulated
on the metal charger contacts on
the hand vacuum, main body and
charging adapter.
Ensure that the outlet is supplying
power to the charger.
Reinstall the plug. Follow plug
installation instructions on page 10.
Be sure the vacuum is seated properly
onto the charging base and there is
nothing obstructing the connections.
- 17 -
SOLUTION
loading