Idiomas disponibles
Idiomas disponibles
CLEANING THE MOTORIZED NOZZLE & BLOCKAGES
Brush Roll Reset
If the brush roll is blocked or
overloaded, the brush roll will
stop turning and the LED lights
on the nozzle will flash ten times
and then turn off. The nozzle
motor will turn off while the unit
motor stays on. Switch the unit
off and remove the obstruction to
reset the brush roll.
Hose Blockage Removal
1. To clean out the hose, press the
hose release tabs, as illustrated,
and pull the motorized nozzle
away from the main vacuum
body.
1
2. Flex the connection hose to
ensure you can see straight
through the other end. If you
can see any blockages in this
area, carefully remove them.
3. Reattach the motorized nozzle
onto the vacuum body.
NOTE:
other sharp objects to remove a
blockage from the hose as these
may damage the hose.
This product contains the
EASYCUT™ blade. Do not touch
the blade when performing
motorized brush maintenance.
1
- 16 -
Do not use scissors or
WARNING
EASYCUT™ BLADE
