Pride Mobility Pursuit 2 Manual De Usuario página 21

I I I . B AT T E R I E S A N D C H A R G I N G
In the event of an electrical fault or a thermal event, the battery power can be quickly disconnected. The batteries
should be isolated for transport to service.
WARNING! When faced with an emergency situation, the batteries can be quickly disconnected
by pulling FORWARD on the emergency battery disconnect strap. Use caution. Be advised
that turning off power to the scooter may cause the scooter to stop abruptly. To release the
emergency stop and restore driving capability to the scooter, remove the seat and battery
shroud, and reconnect the battery connector as shown in fi gure 12.
WARNING! If the battery disconnect strap is engaged while your scooter is in motion, the
electronic brakes will engage and your scooter will come to an abrupt stop.
NOTE: There is a charger inhibit function on your vehicle. The vehicle will not run and the battery condition
meter will not operate while the batteries are charging (when the battery pack is being charged on the vehicle).
NOTE: If equipped, ensure that the battery disconnect switch is in the "on" position (-) prior to charging your
vehicle's battery. The battery will NOT charge if the battery disconnect switch is in the "off " position (O). See
fi gure 12.
WARNING! When faced with an emergency situation, the batteries can be quickly disconnected by
pressing the battery disconnect switch into the "off" position, which will cause the button to pop
up. Use caution. Be advised that turning off power to the scooter may cause the scooter to stop
abruptly. To release the emergency stop and restore driving capability to the scooter, press the
battery disconnect button once again, pressing it down into the "on" position. See fi gure 12.
SC7132
21