Idiomas disponibles
Idiomas disponibles
CONTROLS
Appliance controls
The control panel is shown in figure 10. For reference it is also shown below:
56
All manuals and user guides at all-guides.com
START
1. Clean the parts of the refrigerator with lukewarm water
containing a little neutral detergent and with clear water, and
wipe them dry.
Notes: Electric parts of the refrigerator can only be wiped by
dry cloth.
2. Turn on electricity. The compressor begin to work.
3. Open the door 30 minutes later, if the temperature in the
refrigerator decreased obviously, it shows that the refrigerator
system works well. When the refrigerator operates for a pe-
riod of time, the temperature controller will automatically set
the temperature within limits it opens.
The display is located in the middle of the refrigerator door.
Please refer to the below figure for the layout.
INTRODUCTION OF THE BUTTONS
1 Fridge: to set the refrigerator temperature
2 Freezer: to set the freezer temperature
3 Function: to choose functions of fast cooling, fast freezing,
SmartECO and vacation
4 OK: to enter or to quit the existing function Function setting
Appliance connected to power at the first time
When the appliance is connected to power at the first time,
the display will be lit for 2 seconds before going normal and
the appliance runs with SmartECO function.
DISPLAY CONTROL
When the refrigerator door is closed and there is no button
operation in 3 minutes, the display light goes off.
When the display light is off, open the refrigerator door or
click any button to light it up.
