Idiomas disponibles
Idiomas disponibles
Basin Shower Head Attachment
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these in-
structions in a safe place. If you pass the product
on to anyone else, please ensure that you also
pass on all the documentation with it.
Proper use
This product is suitable for all pressure-tight hot water
systems such as central heating boilers, instantaneous
water heaters, pressurised boilers and the like. It is
not suitable for low-pressure water heaters such as
wood or coal burning bath geysers, oil or gas bath
geysers, open electrically heated water tanks. If in
doubt please seek the advice of a plumber or heating
engineer. The product is intended for personal use
only and not for medical or commercial use.
Description of parts
Basin Shower Head Attachment
1
Screw
2
Wall mounting
3
Dowel
4
Push button
5
Shower hose
6
Seal (ø 19 mm)
7
Fitting connection
8
Adapter piece
9
Seal (ø 21 mm)
10
Aerator
11
Spanner
12
8
GB/IE
Technical data
Wash basin hand shower: approx. 180 x 33 mm
Shower hose:
Fitting connection:
Safety advice
OF LIFE OR ACCIDENT TO IN-
FANTS AND CHILDREN! Never
leave children unsupervised with the packaging
materials. Danger of suffocation. Keep the product
away from children. The product is not a toy.
CAUTION! RISK OF INJURY! Please ensure
that no parts are damaged and that all parts are
correctly assembled. Incorrect assembly could
lead to injury.
Please note that seals are wear parts and there-
fore will require to be replaced from time to time.
Damaged parts could adversely affect safety
and proper function.
CAUTION! RISK OF DAMAGE TO
PROPERTY! Have the installation done by
experienced persons only. Leaks or escape of
water can lead to serious damage to buildings
or household fittings and furniture. Check all
connections for leaks carefully.
Ensure that all seals are correctly seated to
prevent leakage of water.
The product is only suitable for taps with air
gap (the distance between the lowest point of
the outlet orifice and the mounting surface)
more than 67mm.
CAUTION! DANGER OF SCALDING!
When making the hot water setting please ensure
that the temperature of the water is not too high.
Please read carefully through these operating
instructions before installing and using the product.
(length x ø)
approx. 125 cm,
21 mm (G ½") stand-
ard connection
M22 internal thread
(with adapter piece)
M24 external thread
(without adapter
piece)
RISK OF LOSS
