Wolf KGXD Instrucciones De Montaje página 28

KGXD stacked air routing
Remove central frame sections (2 pieces). To do this, undo the screws on the front
and back of the sections.
Now the unit is freely accessible.
If necessary, also extract the mist eliminator to make installation easier.
On the version with bypass damper, also remove these screws.
Appliance version without recirculation air.
Always position bypass plate opposite (if supplied loose) and secure with screws to
the supports.
Affix sealing tape on both sides
Unpack the plate elements as described by manufacturer, then place them one
after another on the base frame, seal them and secure with screws. (Also described
individually below.) Mark up the plate element beforehand to ensure correct
positioning.
28 3064441_201802