Parkside PKIK 4.3 B3 Guia Rápido página 43

6.5.7 Using a microSD card
You can copy pictures stored in the internal memory of your borescope onto a
microSD card. To store recordings onto a microSD card you have to insert a
microSD card into the memory card lot [10]. To do so, insert a microSD card
with the contacts facing towards the front and towards the battery
compartment [2] into the microSD card slot [10] until it clicks in place. From
now, all recordings will be saved onto the inserted microSD card.
To remove the microSD card, gently press on the inserted microSD card. The
microSD card will protrude a little so that you can get hold of it and remove it.
6.5.8 Capturing a picture
Press the record button [3] to take a picture. The captured picture is shown
briefly in a display [1] corner. Then the display [1] shows the live picture again.
Your recording are stored in the internal memory of the camera. You can save
up to approx. 10,000 pictures. If the internal memory is full, "100%" reads on
the display [1]. Before you can capture more recordings, you need to erase
some pictures first. For more on this, see the chapter "Playback function".
If a microSD card is inserted into the memory card slot [10], all
the content recorded is saved onto it.
6.5.9 Capturing videos
Press and hold the Record button [3] for about 2 seconds to record a video.
Video recording starts and the length of the video is shown on the display [1].
Briefly press the Record button [3] to stop recording.
PARKSIDE PKIK 4.3 B3
English - 41