Silvercrest SDK 2500 A1 Instrucciones De Uso página 31

Cleaning and care
RISK OF ELECTRIC SHOCK
► Before cleaning, ALWAYS remove the plug from the mains power socket.
Never submerse the appliance in water or other liquids.
WARNING! RISK OF INJURY!
► Allow the appliance to cool down before cleaning it!
CAUTION - PROPERTY DAMAGE!
► Do not use abrasive, chemical or caustic cleaning agents to clean this appliance!
These can damage the appliance.
■ Wipe the appliance with a damp cloth. For stubborn soiling use a mild detergent
on the cloth.
Ensure that you remove all detergent residues with a moist cloth afterwards.
■ Please wait until the appliance is completely dry before using it again.
Storage
■ Store the appliance in a dry and dust-free place.
Fault rectification
Malfunction
The appliance is
not working.
Disposal
Never dispose of the appliance in the normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your community
waste facility. Please observe the currently applicable regulations. Please contact your
waste disposal centre should you be in any doubt.
│ GB │ MT
■ 28
Cause
The plug is not inserted into
a mains power socket.
The appliance is defective.
The appliance is not
switched on.
Solution
Connect the plug to the power
supply.
In this case, contact the Customer
Service.
Switch the appliance on using the
On/Off switch .
SDK 2500 A1