Pro-Logix PL2310 Manual Del Proprietário página 2

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

A
IMPORTANT SAFETY INSTRUCTIONS - READ THESE FIRST
Read these instructions completely before using the Battery Charger and save them for future
reference. Before using the Battery Charger to charge a battery, read these instructions and the
instruction manual/safety information provided by the car, truck, boat or equipment manufacturer.
Following all manufacturers' instructions and safety procedures will reduce the risk of accident.
Working around lead-acid batteries may be dangerous. Lead-acid batteries release explosive gases
during normal operation, charging and jump starting. Carefully read and follow these instructions for
safe use. Always follow the specific instructions in this manual and on the Battery Charger each time
you use the Battery Charger.
All lead-acid batteries (car, truck and boat) produce hydrogen gas which may violently explode in the
presence of fire or sparks. Do not smoke, use matches or a cigarette lighter while near
batteries. Do not handle the battery while wearing vinyl clothing because static electricity sparks are
generated when vinyl clothing is rubbed. Review all cautionary material on the Battery Charger and
in the engine compartment.
This battery charger is equipped with a setting for charging a specific type of lithium battery
chemistry, Lithium Iron Phosphate (LiFePO4). The charger's lithium charging function is optimized
for this type of lithium battery only, as noted on the control panel. There exist many different lithium
battery types, each using a different specific lithium battery chemistry. Do not charge any other
lithium battery types using this charger – doing so could result in personal injury and/or property
damage.
Always wear eye protection, appropriate protective clothing and other safety equipment when
working near lead-acid batteries. Do not touch eyes while working on or around lead-acid batteries.
Always store clamps away from each other or common conductors. Improper storage of clamps may
cause the clamps to come in contact with each other, or a common conductor, which would be
hazardous if the Battery Charger was plugged into an AC outlet.
Use extreme care while working within the engine compartment, because moving parts may cause
severe injury. Read and follow all safety instructions published in the vehicle's Owner's Manual.
Batteries being charged with the Battery Charger unit likely contain liquid acids which are hazardous
if spilled.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
WARNING
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Failure to follow instructions may cause
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
damage or explosion, always shield eyes.
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
Read entire instruction manual before use.
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiver antenna
- Increase the separation between remote and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
WARNING
2
Tabla de contenido
loading

Este manual también es adecuado para:

Pl2320

Tabla de contenido