GE 20 Manual Del Propietario E Instalación página 19

Installation Instructions
LEVEL THE REFRIGERATOR
The leveling legs have 2 purposes:
l) Leveling legs adjust so the refrigerator is
firmly positioned
on the floor and does not
wobble.
21 Leveling legs serve as a stabilizing brake
to hold the refrigerator securely in position
during operation and cleaning. The leveling
legs also prevent the refrigerator from
tipping.
r_ Remove the grille by removing the two Phillips
head screws.
r_ Turn the leveling legs clockwise to raise
the refrigerator, counterclockwise to lower it.
CAUTION: Toavoid
possible
personal injury or property damage,
the leveling legs must be firmly touching
the floor.
r_ Replace the base grille by inserting the two
Phillips head screws.
r_ SET THE CONTROLS
Set the controls to the recommended setting.
5 5
o _s off o isoff
9 is CoFdest 9 is Cotdest
5 5
["EOOMME"OEO CO"'"O" SE''"OS 1
Adjust Freezer Adjust Refrigerator
Temperature Temperature
19
REMOVE PACKAGING, START
ICEMAKER (icemaker models)
A) Remove all tape, foam and protective
packing from shelves and drawers.
B} Remove the tie downs from the freezer
baskets.
C} Place half width basket onto drawer slides.
See About the freezer section for instructions.
Set the icemaker power switch to the I Ion} position.
The icemaker will not begin to operate until it
reaches its operating temperature of 15°F (-9°C) or
below. It will then begin operation automatically. It
will take 2-] days to fill the ice bin.
NOTE: In lower water pressure conditions, the
water valve may turn on up to 3 times to
deliver enough water to the icemaker.