Parkside PABH 20-Li B2 Traduccion Del Manual De Instrucciones Originale página 52

Martillo perforador recargable
Ocultar thumbs Ver también para PABH 20-Li B2:
Idiomas disponibles
  • ES

Idiomas disponibles

Safety instructions for hammer drills
Wear hearing protection. Exposure
to loud noise can lead to hearing loss.
Use the additional handles supplied with the
appliance. Loss of control can lead to injuries.
Hold the appliance using the insulated handle
areas if you are carry out any work during
which the attached tool could contact hidden
power cables. Contact with a live wire may
electrify exposed metal parts of the power tool
and could give the operator an electric shock.
Wear a dust mask.
WARNING! TOXIC DUST!
Working with the tool can produce harmful/
toxic dusts which represent a health hazard
for the person operating the appliance and
for anyone else in the vicinity.
CAUTION, POWER CABLES! DANGER!
Ensure that you are not likely to hit power, gas
or water supply lines when you are working
with the power tool. If necessary, check with a
service line detector before you start to cut or
drill into a surface.
Original accessories/auxiliary
equipment
Only use the accessories and additional
equipment that are specified in the operating
instructions and compatible with the appli-
ance.
 GB │ MT
48
Before use
Charging the battery pack (see fig. A)
CAUTION!
Always pull out the plug before you remove
the battery pack
battery pack to the charger.
Never charge the battery pack
the ambient temperature is below 10°C or
above 40°C.
Connect the battery pack
battery charger
Insert the power plug into the socket. The con-
trol LED
lights up red.
The green LED
indicates that the charging
process is complete and the battery pack
ready.
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
Checking the battery charge level
Press the battery charge level button
check the status of the battery (see also main
diagram). The status/remaining charge will be
shown on the battery display LED
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
from or connect the
when
to the high-speed
(see Fig. A).
to
as follows:
PABH 20-Li B2
is
loading