Idiomas disponibles
Idiomas disponibles
USING THE STAND MIXER
(OPTIONAL) Pour ingredients into the
bowl through the pouring chute.
DISASSEMBLING THE STAND MIXER
Raise the motor head: Check to
be sure that the Stand Mixer is
unplugged, and the speed control is
turned to "0"; then slide the locking
1
lever to the unlock position and lift
the motor head. Once lifted, slide
the locking lever to the lock position
to keep the motor head up.
Remove the accessory: Turn the
speed control to "0", unplug the
Stand Mixer, and tilt the motor head
2
back; then, press the accessory
upward as far as possible, turn the
accessory clockwise and pull it away
from the beater shaft.
*Accessory sold separately
W10747071B_EN_v01.indd 9
NOTE: The pouring shield* can be
used to avoid ingredients splashing
out of the bowl when mixing as well
as to easily pour ingredients in the
bowl while mixing.
(OPTIONAL) Remove the pouring
shield*: Lift the front of the pouring
shield* clear of the rim of the bowl,
and pull away from the Stand Mixer.
Remove the bowl: Gently turn
3
the bowl counterclockwise to release
it from the bowl clamping plate.
USING THE STAND MIXER | 9
2/29/16 2:15 PM
