Idiomas disponibles
Idiomas disponibles
USING THE STAND MIXER
OPTIONAL ATTACHMENTS
KitchenAid offers a wide range of optional attachments such as the spiralizer, pasta
cutters, or food grinder that may be attached to the Stand Mixer attachment power
hub as shown here.
Check to be sure that the Stand
1
Mixer is unplugged, and the speed
control is turned to "0".
Insert attachment into attachment
hub, making certain that attachment
power shaft fits into the square
attachment hub socket. It may be
3
necessary to rotate the attachment
back and forth. When it is in the
proper position, the pin on the
attachment will fit into the notch
on the hub rim.
10 | USING THE STAND MIXER
W10747071B_EN_v01.indd 10
Turn the attachment knob
2
counterclockwise to remove
attachment hub cover.
Tighten the attachment knob
by turning it clockwise until the
attachment is completely secured
4
to the Stand Mixer. See the
Instructions manual that came
with your attachment for detailed
directions on using the attachment.
2/29/16 2:15 PM
