Print Paper Specifications And Print Position - Citizen CBM1000II Serie Manual Del Usuario

2.4 Print Paper Specifications and Print Position

(1) Thermal Paper roll
Paper width 80 +0/-1
4 Maximum print area 72
(2) Thermal label sheet (label gap detection) * Only L-Spec.
Base sheet width: 80 +0/-1
Max. label width: 76
Maximum print area 72
CAUTION
• A roll paper not complying with the specifications may cause some departure in print tone.
Adjust print tone with the DIP switch (see "Setting DIP Switches").
• Do not paste paper end to the core as it may cause coloration or faint letters if printed
documents are exposed to a particular chemical or oil afterwards.
• Rubbing the document surface with your nail or metallic device may cause coloration.
• Coloration occurs at a temperature of around 70°C or above. Keep documents away from
heat, moisture, or light.
Paper width 58
4 2 Maximum print area 54
Base sheet width: 58 +0/-1
Max. label width: 54
Maximum print area 50
— 12 —
2
(Recommended papers)
TF50KS-E2C from Nippon Paper
KP50 from Shin-Ohji Paper
F230AA or HP220A from Mitsubishi
Unit: mm
Paper or equivalent
(Recommended papers)
KPT86S/G63BC P22 from Ohji Tac.
or equivalent
Unit: mm
Printing surface
Printing surface