Orbis VIARIS UNI Manual De Usuario página 79

The charger could not connect to a
WiFi network.
View basic charger data, set up pow-
er and scheduled load, or consult
historical consumption, if I don't have
coverage in my garage floor.
The charger is in error mode and cuts
off the load
DIRECTIVES AND REFERENCE STANDARDS
Hereby, ORBIS TECNOLOGÍA ELÉCTRICA S.A. declares that the type of
VIARIS UNI wireless device is in compliance with Directive 2014/53/EU. The
full text of the EU declaration of conformity is available at the following In-
ternet address: http://www.orbis.es/downloads/declarations-of-conformity
Subject to technical changes – additional information at www.orbis.es
If the Wi-Fi indicator (
blue and does not pass to solid blue,
the charger has not been correctly
configured or the correct password has
not been entered.
If the Wi-Fi indicator is in solid blue it is
connected to a Wi-Fi network without
internet connection, or the security of
the network is blocking it
Read the section of the instruction
manual Smart charger control via
web. (Once connected to the Wi-Fi
network with the password 12345678,
we open a web browser and write
192.168.4.1).
To identify the type of error you must
look at the number of repeats of
beeps per sequence:
- AC leakage error: 1 beeping
- Relay opening error: 1 beep
- DC leakage error: 2 beeps
- Diode error: 3 beeps
- Earthing error: 4 beeps
78
)is in flashing