Orbis VIARIS UNI Manual De Usuario página 77

TROUBLESHOOTING
Problem
The charger is powered, and no plug
connected and with the light indica-
tors off.
Charger connected to the vehicle,
the status bar is solid green and does
not charge.
Charger connected to the vehicle,
the status bar is in flashing green and
does not charge.
Charger connected to the vehicle,
the status bar is flashing green and
when the RFID
charger emits one "beep" and the
status bar lights up red and returns to
flashing green.
Charger connected to the vehicle,
the status bar is in solid blue and does
not charge.
Charger connected to the vehicle,
the status bar is in blue of varying in-
tensity and does not charge.
Charger connected to the vehicle,
the status bar is in flashing blue and
does not charge.
Charger connected to the vehicle,
the status bar is solid red and does not
charge.
card passes the
Check the power according to the
connection scheme and that the
protections are activated.
Power down the charger, wait ap-
proximately 10 seconds and restart
the charger.
There is no communication between
the vehicle and the charger.
Check the cable is correctly inserted
into the vehicle and charger.
Ensure cable is not damaged.
The charger is not authorised to
charge: pass the authorised RFID
card.
Unauthorized RFID user
Check the list of authorized cards.
Check that there is no time schedule
on either the charger (
vehicle.
The vehicle may be in standby mode.
Open the vehicle door to exit the
standby mode.
The load modulator icon (
the installation does not have enough
power to charge the vehicle.
The vehicle has finished charging,
check that the battery is full or that
the vehicle has no time schedule.
Error; turn off the charger from the
protections and switch back on.
76
Solution
) or the
) is on;