Orbis VIARIS UNI Manual De Usuario página 64

Single phase
charger
Connect the output of the TMC100 to the plug-in connector that is sup-
plied and plugged into the control circuit.
Braided torque cable with section 0.25-0.5 mm², maximum length
1000 m, and with a peeling of 6-7 mm and torque of 0.2 Nm
Three-phase
charger
The connector is located at
the top of the circuit and de-
pending on the version may
be located in different posi-
tions. The drawing is indicative.
Check the circuit marking to
ensure a correct connection.
Respect the ± indications so
that the
correct.
63
measurement is