Idiomas disponibles
Idiomas disponibles
Telephone Helpline: 0845 146 2887 (United Kingdom)
Attach/Detach the Blades
WARNING: Always handle the blades by the flat ends and the plastic handles.
1.
Place the blades alongside each other and facing the same direction so
the black plastic handles face outwards.
2.
Slot the lug in the first blade into the hole of the second blade and slide
along.
3.
Align the blades and insert them into the appliance; holding them by
the handles.
4.
Push until they click into place.
To remove:
1.
Push the Blade Release button and pull both blades from the appliance
simultaneously; holding them by the handles.
Cutting
Note: Before using for the first time clean the blades in warm soapy water. Dry thoroughly.
The appliance will only work if the power button and trigger are pressed AT THE SAME TIME.
1.
Place the blades against the item to be cut.
2.
Press both power buttons to start the blades.
3.
Apply slight pressure, but do not exert too much force. Allow the blades to cut through the foodstuff.
Cleaning, Care & Maintenance
•
Always turn off and disconnect the appliance from the power supply before cleaning
•
Take care when handling the blades.
•
Use warm, soapy water to clean the blades.
•
Use a damp cloth to clean the exterior of the appliance.
•
Dry thoroughly after cleaning.
Troubleshooting
Fault
The unit is not
The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Both power buttons not being pressed
The knife is not
Blades are blunt
cutting properly
Blades not attached properly
Probable Cause
Action
Check the unit is plugged in correctly and switched
on
Call BUFFALO agent or qualified technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Press both power buttons to operate the appliance
Replace blades
Disconnect appliance from the power supply and
remove/replace blades. Ensure they click into place
UK
Lug
Hole
2
